Determining the type of sleeve

This article presents and describes examples of popular sleeve types that are available in several clothing categories in AstraFit System.

 

  1. Set-in sleeve

A set-in sleeve is a sleeve cut in which the sleeve is sewn to the armhole at the place of the natural transition of the shoulder into the arm.

Untitled.png

Untitled.pngUntitled.png

Set-in sleeves can also be of non-classical cut.

Untitled.png

Sleeves with a lowered shoulder also belong to the type of “set-in” sleeve.

Untitled.pngUntitled.png

Clarification !!! If the seam in the sleeve is at the level of the elbow and lower, or the side line from the waist to the seam of the sleeve has a pronounced smooth configuration, that sleeve can be safely attributed to the “one-piece” sleeve type.

Untitled.png

The set-in sleeve and raglan sleeve, in contrast to the one-piece, have an acute angle at the place of grinding of the sleeve and bodice.

Untitled.png

 

2. One-piece sleeve

The one-piece sleeve is a type of sleeve cut in which the sleeve is cut out as a single piece along with the shelf and back of the product. This cut is characterized by the complete or partial absence of an armhole line.

Untitled.png

The lateral line from the waist to the seam of turning in a one-piece sleeve necessarily has a pronounced smooth configuration.

Untitled.png

Untitled.pngUntitled.png

!!! Please note that if there is a seam in the one-piece sleeve located above the elbow, and an “acute angle” is traced at the place where the sleeve and bodice are grinded, we attribute the sleeve the “set-in” type.

Untitled.png

 

3.  Raglan

The Raglan sleeve is a cut of a sleeve in which the sleeve is cut out along the shoulder part of the product and sewn to the neck. A feature of such a cut is an open armhole and the absence of a shoulder seam, which is replaced by a tuck or upper seam of the sleeve.

 

Untitled.png

Untitled.pngUntitled.png

Untitled.pngUntitled.png

 

4.  Sleeveless

When the sleeve’s length and width are impossible to measure, the product’s type is “Without sleeve”. 

Untitled.pngUntitled.png

 

Untitled.png

 

The type of sleeveless products also include such dresses and T-shirts: 

 

Untitled.png

Attention !!! A variation of the sleeve - “wing” according to the Astrafit system, refers to the type of sleeve “Sleeveless”, since there is no way to measure the length and width of the sleeve.

Untitled.pngUntitled.png

 

5. One shoulder

One shoulder sleeveless.

Untitled.png

 

One shoulder - with sleeve.

Untitled.png

 

If the sleeve on one shoulder is a one-piece, we refer to the type as “one shoulder” - “without sleeve”.

Untitled.png

 

One shoulder without sleeve. The wing on the AstraFit system is not a sleeve !!!

Untitled.png

 

6. Without top

No top - no straps - no elastic.

Untitled.png

 

No top - no straps - with elastic.

Untitled.png

 

Without top - with shoulder straps.

Untitled.pngUntitled.png

 

No Top - Combined.

Untitled.pngUntitled.png

 

 

 

 

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.